Crafts Home > Card
Embroidery Christmas Ornament Card
I just started
doing paper embroidery in July, 2003. It reminds me of the string
art I used to make as a child. One of the things I like about
paper embroidery is that you can create so many different effects
with the same pattern just by varying the amount of space skipped
instructions are for the teardrop shaped pattern. The pattern is
available for download in PDF format.
If this is the
first time you have tried paper embroidery, I recommend using
heavy card stock as it will not tear as easily as the lighter
weight card. I also recommend using a high quality embroidery
floss such as DMC. The first few cards I made I used cheap floss
and it frayed as I pulled it though the card, leaving the lines
You will need:
- Teardrop pattern (Click
- Heavy card stock 3 3/4" x 5"
- Decorative paper - 3 3/4" x 5"
- A craft knife for cutting the aperture in
the decorative paper
- Pre-folded 4 1/4" x 5 1/2"
greeting card blank(or you can cut your own)
- Foam pad (1/8" or so thick)- this
will get poked full of holes so be sure to use something you
don't want to keep.
- Embroidery needle
- Paper piercing tool (optional)
- DMC embroidery floss: Red #304 and Gold
- 6 inches or so of thin gold ribbon
- Cellophane tape
Center the pattern on the front of the heavy cardstock and tape it
down using low-tack tape. Place the cardstock on top of the foam
pad. Using a paper piercing tool or your embroidery needle, poke a
hole through each of the dots in the pattern making sure to go all
the way through the card. When you have punched all of the holes,
gently remove the pattern.
Start with the circle in the center. Use a single strand of gold
embroidery floss. Tape the end of the floss to the back of the
card. It's best not to tie knots as they will prevent your
finished work from laying flat. Refer to the picture to the left.
Red represents needle going from the back of the card to the front
(or up). Black represents the needle going from the front of the
card to the back (or down) Bring the needle up at 1, skip forward
8 holes and bring the needle down at 2, then up at 3, down at 4,
up at 5, etc.
Continued on Page 2